Introduction
The
R131VX
is a
L
ON
W
ORKS
®
telemetry receiver designed for driving a 24 VDC variable
speed pan & tilt head, a motorised zoom lens and six auxiliary functions operated via the
potential free relay contacts.
A 12 VDC power supply output for driving e.g. a camera is available as well as possible
fitting of an optional video transmission module; for twisted pair or optical fiber.
The R131VX features 128 pre-positions, four fully programmable pre-set tours, four privacy
zones, Auto-pan, Home-function, soft-limits, programmable lens drive voltage, tamper alarm
and selection of pan & tilt head brand and type.
All settings are selected remotely using the
S111SX Node Manager
- no on-board settings
are required or even possible.
Daily operation is carried out using the keyboards Series K111DX.
Validity
This manual cover the R131VX, serial number R131VX-000100 or higher.
Compatibility
The R131VX is compatible with any SYSTEM X component.
Any motorised lens with two individual wires per function driven by 6-12 VDC can be used,
however, to ease installation and for optimum Privacy Zone performance the use of the
Ernitec motorised zoom lenses
Series Q
is highly recommended.
The following DC pan & tilt heads are compatible:
v
Ernitec MPT-5P
v
Conway C2020
v
Molynx Mustang PT12
v
Shawley Prince 165
v
Videmech 555P
Approvals
The R131VX is
-certified and approved in accordance with the EU directives regarding
Electromagnetic Compatibility (EMC) and Low Voltage safety (LVD) with respect to the
EN 50081-1 (EMC, emission), the EN 50130-4 (EMC, immunity) and the EN 60950 (LVD,
safety) standards.
Warning:
To fulfil the above regulations make sure to carefully follow the installation
instructions in this manual.
Trademarks
Echelon
®
, LON
®
and
L
ON
W
ORKS
®
are trademarks of Echelon Corporation registered in the
United States of America and other countries.
2852-00001
Page 1
S Y S E M
