8
User’s Manual – Orion DX 822IR
© 2016 Ernitec. All rights reserved
www.ernitec.com
V 01101116
2. C
AMERA
C
ABLING
The outdoor models are being IP66-rated to prevent water from entering the
camera. However, water might still enter the camera if it is being improperly
installed. Please make sure the warnings below are strictly followed when
installing the camera.
Place all cables and the adaptor in dry and well-waterproofed
environments, e.g. waterproof boxes. The purpose is to prevent
moisture accumulation inside the camera and moisture penetration
into cables.
While running cables, slightly bend the cables to a U-shaped curve to
make a low point (as demonstrated in the figures below). The purpose
is to prevent water from entering the camera along the cables from
above.
The cable entry hole of the outdoor mounting kit (indicated in the figure
below) needs to be sealed with thread seal tape to avoid water from
entering the camera.
