7
16CH:
To set up dome camera
’s protocol and ID, press
MENU
to access the OSD main menu, and
select <
Camera Setup
>. Then select <
Dome Protocol
> and choose the corresponding
protocol. Next select <
Dome ID
> and choose a preferred ID number. Note that the ID number
must match the ID address defined by the dome camera.
To configure the RS-485 parameters, select <
System Setup
> from OSD main menu, and then
select <
RS485 Setup
>. The default
RS-485 settings are 9600 Baud, 8 Data Bits, 1 Stop Bit and
No Parity.
Control Buttons in Dome Camera Control Mode:
1
Iris Open
5
Zoom Out
9
Enter Dome Camera
Control Mode
2
Iris Close
6
Zoom In
10
Pan / Tilt
3
Focus Far
7
Set / Go Preset
11
Enter / Auto
4
Focus Near
8
Go Presets 1~6
12
ESC
