ERNITEC 1504M, Инструкция по эксплуатации

Страница: 2 / 16

Validity
These lnstructions covers the following keyboard:
Keyboard type 1504M, software version 1.1 Release 990831, or later.
Compatibility
The 1504M keyboard is compatible with the following equipment:
All versions of the E-Mux Multiplexer.
Series BDR-510 telemetry receiver, software V.1.0 Release 05.11.96, or later.
Series BDR-550 telemetry receiver, software V.2.0 Release 16.10.96, or later.
BDR-575 telemetry receiver, software version 1.0 Release 13.03.97, or later.
Integrated Camera Unit (ICU), software version 1.0.
SATURN Dome camera, version PR1 19990810, or later.
Approvals
The 1504M keyboard is CE certified and approved with respect to EN 50081-1 and
EN 50130-4 (EMC) and EN 60950 (LVD).
Introduction
The keyboard 1504M can be used for operating one E-Mux Multiplexer, as well as for direct
operation of up to 32 telemetry receivers Series BDR-510, Series BDR-550, BDR-575, ICU
and/or SATURN Dome camera.
Keyboard connections
The keyboard connections are shown on figure 1 .
# Description
1-10 Power supply connector for the supplied mains adapter or for external voltage 9-18 VAC/VDC 2,7 VA
1-11 Not used.
1-12 Not used.
1-13 RS-485/RS-232 connector used for connection of E-Mux (RS232), and Telemetry Receivers (RS485).
1-14 Switch for RS-485 line termination.
Please note
When reference is made to a figure, the drawing(s) can be found in the back of these
Installation Instructions.
1504M E-Mux & PTZ control
Page 2 2821-00062