Use and maintenance manual
Auto-Puncher for timing belts
Model: APTM-600
____________________________________________________________________________________________________________________
P a g . 6
Provide compressed air through a tube with a minimum interior diameter of 8 mm., connected to
the intake.
NOTE:
One must bear in mind that the air consumption of this punch cutter is 280 litres/minute.
Connect the power cable to the control board at 230v monophasic.
NOTE:
It is recommendable for the air and power lines to be run from above to prevent the staff
tripping or falling.
-
Description:
Pneumatic punch cutter with a motorised head to cut conveyor belts in zigzag, with ball screw
activated by a stepper motor and positioning control. Pressure and punch cutting time control.
Exchangeable cutting heads for different cutting geometries, with the possibility of programming
diverse forward steps.
Support bench with material positioning guides.
This punch cutter is especially designed to cut thermoplastic materials with interior fabric.
