8
8. Prevent debris collection around the machining station. In case of high dust
concentration, cover the machine.
9. Working without a shield is forbidden.
10. Starting while manipulating the machine (fitting and unfastening elements,
positioning the machining material) is forbidden.
11. Start the machine only after the preparation has been completed and when
there is no danger of body or machine damage.
6. Troubleshooting
Problem Cause
Solution
1. After starting the machine the
power diode does not light
a. no power supply
b. no 1 phase
c. voltage fall to
175V/phase
Check the power
supply
2. The machine switches off
while running
a. no phase at
engine
b. engine alarm went
off
c. no power supply
Check power supply
and engine alarm
3. Loud pump running with no
servo-motor motion
d. cover not closed
e. electrovalve
has
broken
Close the cover
correctly. Contact
service.
ERKO company reserves the right to technical changes improving/modernizing its products.
