# VHG200020614
- 13 -
6 TECHNOLOGY
6.1 BENDING
When the station has just been started, carry out the operations according to
item 5.1
Equip the station with the bending mandrel and measuring insert according to
item 6.1.1 and enter the settings according to item 5.2
Slide a busbar in a space between the mandrel and measuring insert and
slide a busbar close to the mandrel.
Close the clamp (fig. 33).
Press and hold the foot switch (Q3) to start the bending cycle. When the
operation is finished, the piston rod returns automatically to the initial position.
To repeat the operation, release the foot switch and press it again.
Releasing the foot switch during the cycle results in the operation interruption
and return movement of the piston rod to the start position.
6.1.1
EQUIPPING THE BENDING STATION
To equip the bending station:
Mount the suitable bending radius in the bending mandrel and fasten it with
two bolts (fig. 27). The mounted mandrel is shown in figure 28.
