Supported Alteia Protocol Commands and Messages
1
Introduction
1.1
Overview
This User Guide document describes the serial remote control interface available on
the RX8200 IRD Software versions 5.9.0 and above. This allows the control of the IRD
from a PC or similar device through a standard serial port.
The RX8200 supports:
•
Ericsson TV Serial Remote Control Protocol
The Ericsson TV protocol is based on the original System 3000/Alteia protocol. In this
document this protocol is referred to as
Alteia Remote Control
.
1.2
Who Should Use this User Guide?
This User Guide is written for operators/users of the RX8200 Receivers to assist in
installation and operation of
Serial Remote Control
.
Caution!
Unauthorized maintenance or the use of non-approved replacements may affect the
equipment specification and invalidate any warranties.
6 (59)
Document No. ST.TS.EXXXXX.1 2010-03-04
