Ericsson PCS Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 44

Ericsson PCS Скачать руководство пользователя страница 33

33

Pressing the HOME button when the radio is

scanning will temporarily stop SCAN for five (5) seconds.
Pressing the PTT, CHANNEL UP, or CHANNEL DOWN
buttons within the five second interval will turn SCAN off
and the radio will remain on the HOME channel. The
radio will resume scanning if one of the above mentioned
buttons is not pressed within the five second interval.

EMERGENCY Button Programmed

If programmed as an EMERGENCY button and no

HOME channel is programmed, press and hold the
EMERGENCY button for at least one (1) second to
transmit the emergency ANI code on the selected
channel. If the radio is programmed with a HOME
channel, the emergency ANI code will be transmitted on
the HOME channel instead of the selected channel.

If the radio is scanning when the EMERGENCY

button is pressed and no HOME channel is programmed,
the radio will stop scanning, transmit the emergency ANI
code on the selected channel, and resume scanning. If
the radio is scanning when the button is pressed and a
HOME channel is programmed, the radio will stop
scanning, transmit the emergency ANI code on the
HOME channel, switch receive operation to the HOME
channel, and resume scanning.

Emergency transmissions can only be disabled by

turning the radio off and then back on.

«
...
31
32
33
34
35
...
»

Содержание PCS













































Отзывы:

Нет отзывов