Ericsson PCS Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 44

Ericsson PCS Скачать руководство пользователя страница 24

24

"PG" status indicator will illuminate (does not flash). If the
Monitor mode is programmed and a Type 99 channel is
selected, the "PG" status indicator will flash.

When the radio is operating in the Selective mode, it

operates as a tone and voice receiver and only those
calls that are coded for it will be heard.

When the radio is operating in the Monitor mode, all

calls (with the correct Channel Guard, if programmed)
will be heard.

In either mode, when a Type 99 channel has been

selected and a valid code is received, a series of beeps
will alert you of the incoming call. The "PG" status
indicator will flash at a slow rate. If the radio is in the
Selective mode, it will automatically switch to the Monitor
mode.

Type 99 Selective Call Receiving and Sending

1.

Select the appropriate channel to receive the
Type 99 tone signal. The "PG" status indicator
will show in the display window.

2.

After the Type 99 call is received and the beeps
are sounded, press the PTT button and answer
the call. When the communication sequence is
completed, press the MONitor button to reset the
radio for the next call.

3.

When the radio is reset (Selective Call mode),
Type 99 operation can be disabled by pressing

«
...
22
23
24
25
26
...
»

Содержание PCS













































Отзывы:

Нет отзывов