16 (34)
BRU3 MANUAL
BRU3 MANUAL, Doc.no: 155 16-ANNA 805 08 Uen, Rev H, 2003-02-07
5.7
Reset Button
To enable a hardware reset of the FCB and the FMB (Modem Board), and also,
the FRB (FE Radio Board), the FCB is equipped with a reset button located next
to the LED Status indicator. To reach the button for a reset operation, use a long
and narrow, non-conductive object (pen or similar). A reset of the FCB may be
generated for the following reasons:
1.
Power-on reset: The reset is generated at power-on, and also, when a
power drop occurs.
2.
Switch reset: The reset is activated when the reset button is pressed.
3.
Watchdog reset. The reset is activated by the watchdog function if not
maintained.
4.
CPU reset: The reset is performed by the CPU when a reset instruction is
executed. In this specific case, no reset of the CPU itself is carried out.
