Ericsson HN290dp, Быстрое руководство по установке

Страница: 8 / 16

8 Installation
5 5
5 5
5 VERIFY THE INST VERIFY THE INST
VERIFY THE INST VERIFY THE INST
VERIFY THE INSTALLA ALLA
ALLA ALLA
ALLATION TION
TION TION
TION
Check the control lamps (LEDs) on the front of the HN290dp (accord-
ing to the description on page 12) to verify that the installation has
been properly done.
Then proceed to chapter “CONFIGURATION” on the next page to
get instructions about how to configure the HN290dp and to finish
the installation.
4 . 4 .
4 . 4 .
4 . Click Next> Next>
Next> Next>
Next> . Files will now be copied to your harddisk and when
completed the following window appears:
5 . 5 .
5 . 5 .
5 . Now, connect the provided USB cable USB cable
USB cable USB cable
USB cable to the USB USB
USB USB
USB port on
your HN290dp. Connect the other end to the USB port on your
client PC. This port is most likely marked with this symbol:
6 . 6 .
6 . 6 .
6 . Windows will now detect the new USB device and finalize the
installation.
NOTE! NOTE!
NOTE! NOTE!
NOTE! If the Digital Signature Not Found window (or similar)
appears, just click Yes (or Continue Anyway) to proceed.
7 . 7 . 7 . 7 . 7 . Click Finish Finish Finish Finish Finish to close the InstallShield Wizard. Click >>> Exit >>> Exit >>> Exit >>> Exit >>> Exit
<<< <<<
<<< <<<
<<< in the Welcome page of the CD to close this window.
3 . 3 . 3 . 3 . 3 . Select Install USB Driver Install USB Driver Install USB Driver Install USB Driver Install USB Driver and wait until the following window
is displayed: