2
Disclaimer
The contents of this document are subject to revision without notice due to conti-
nued progress in methodology, design, and manufacturing. Ericsson shall have no
liability for any error or damage of any kind resulting from the use of this
document.
Introduction
This guide describes briefly how to install the HBS2 access point (AP) and how to
pair/bond this to the mobile phone.
HBS2 Installation
It is recommended to place the HBS2 as centrally as possible in the area to give
coverage; see
Figure 1
.
A
height of at least 1 meter above floor level is advised.
Figure 1
Example on centrally placement of HBS2 in the home;
circles indicate distance to the HBS2
The HBS2 can be placed on the wall; see
Figure 2
or standing on a desk, shelf or
the like; see
Figure 3
.
In principle the HBS2 may be placed where desired, although, to get the best
coverage, it is recommended not to place the HBS2 close to metallic objects, as