Reading a Message
When you receive a message, a signal sounds and the display
informs you of it. The indicator light on the top of the phone
blinks rapidly green.
You now have two options:
•
If you want to read the message at once, press
YES
.
•
If you want to read the message later on, press
NO
. The
message will be stored in the Messages memory and a let-
ter icon (
Mm
) is shown to the left at the bottom of the
standby display. Press any key (0-9, *, #) to clear the
New
Message
message.
If you pressed
YES
you will see the first three lines of the mes-
sage, showing you who the message is from and when it was
received. If the number of the incoming call matches one of
your phone book entries, the name will be presented (6 let-
ters or less). If no name is associated, the number will be pre-
sented.
New
stands for a new unread message.
If the message is older than 24 hours, the time will be re-
placed with the date the message arrived. However, you can
toggle between the date and time by pressing the
*
key.
•
Press
YES
to read the first line of the message.
•
Scroll through the message using the navigation key.
RIGHT
takes you forward and
LEFT
takes you backward
through the message.
•
To move three lines forward, press 3. To move three lines
backward, press 1.
•
Press and hold
LEFT
to return to the beginning of the
message.
The message
Reply?
appears after the last line of the mes-
sage. If the caller wants you to reply, the displayed message
will say
Reply Requested, Reply?
, provided
your network supports this.
In Analog mode, the “From ....” message will not appear with
an SMS.
Replying to a Message
l
If you want to reply to a message, press
YES
.
Your display now looks like this.
•
To enter your message, press
YES
and proceed as de-
scribed in Composing and Sending Messages.
l
If you do not want to reply, press
NO
.
Tip!
If there is a phone number in the received message, you can
call it by simply pressing
YES
. After the number has been
called, the message is considered read and it remains in the
Messages memory.
Embedded Numbers in SMS
Sending an Embedded Number in a
Message
When sending a message to another wireless phone, or when
asking someone to send a message to your Ericsson phone,
you should follow the guidelines listed below to ensure that
the phone retrieves the entire number from the message, dis-
plays it, and allows the phone user to dial the number by
pressing
YES
. This information does not in any way imply
that the Ericsson phone is capable of receiving them, it is
25
Some features/menus are operator dependent
L
New
R
4
NETWORK
7
2
22-Jul-978
Mm
13:23
New
R
12:54
From:l5551212
12:54
From:l456807
Hi John!
R
Goodbye!
L
Reply?
4 NewMessage 7
2
8
Read Now?
