Ericsson 230i, Руководство пользователя

Страница: 22 / 45

Basic use and settings 21
No
t for
Co
m
m
ercial
Us
e
E
ri
css
on
Bu
si
ne
ss M
ob
ile
N
etwor
ks
B
V
Restricting your telephone number from being sent
When you make a phone call your telephone number is normally sent to the
person you are calling. With the
CLIR (Calling Line Identification Restriction)
menu option you can prevent this information from being sent.
With the COLR (Connected Line identification Restriction) menu option you
can prevent a calling party seeing your phone number when you answer the
call.
Ringer
The base station rings when an external call is received. You can adjust the
ring volume via the menu.
Ringing order
The base station is pre-set so that all handsets ring at the same time. However,
you can also personalise the order in which the handsets ring.
Setting the ringing order. Using a handset, you can program the order in
which the handsets ring. You are given the following options:
• One means only handset 1.
•
One, Rest
means first handset 1, then all handsets.
•
One, Two..
means first handset 1, then 2, then 3, etc.
• All means all handsets at the same time (default).
As soon as you assign a telephone number (MSN) to a handset, you may want
to change the ringing order to
One, or One, Rest . One in this case stands for all
handsets with the same telephone number.
Note The base station will always ring to any assigned telephone number.
Setting the ring delay. You can also set the number of rings after which the
next handset starts to ring.
Auto divert
The auto divert feature means you can be reachable by phone even when you
are out of range of the base station. When you are in range, calls are routed to
your handset. If you are out of range for any period of time, calls can be
routed to a GSM phone or a voice mailbox, for instance.
If this feature is on, the base station scans for your handset at regular intervals.
If it cannot locate the handset, it calls a certain telephone network service to
activate a diverted telephone number. As soon as the handset is located again,
the same service is called to deactivate the diverted telephone number. Ask
your dealer or retailer for more information on the call diversion service.
Auto divert can only be set for one handset. If a diverted telephone number is
activated, no calls may be received by the base station until the priority phone
handset is located again.
Setting the priority phone for auto divert. To be able to set a priority phone
for auto divert, a MSN (see“Multiple Subscriber Numbers (MSN)” on page 20
>BaseStation
>Basic
>PhoneLine
>CLIR
>COLR
>BaseStation
>RingVolume
>BaseStation
>Basic
>RingOrder
>Priority
>Delay