Ericsson 230 Скачать руководство пользователя

Страница: 98 / 107

Not

or Comm

l Use

ricsson Mobile

Com

unic

ons A

Reference

accepted as a proof of purchase when presented to the dealer from whom

the product was purchased.

The warranty is not applicable in circumstances other than defects in mate-

rial, design and workmanship. The warranty does not cover the following:

•

Periodic checks, maintenance, repair and replacement of parts due to

normal wear and tear, exchange of faulty batteries or upgrading of soft-

ware due to changes in network parameters.

•

Damage to the product resulting from:

•

Abuse or misuse, including but not limited to the failure to use the

product for its normal purposes or in accordance with Ericsson’s

instructions for use and maintenance of the product, or the installa-

tion or use of the product in a manner inconsistent with the techni-

cal or safety standards in force.

•

Repairs performed by non-authorized service workshops or open-

ing of the unit by a non-authorized person.

•

Accidents, acts of God or any cause beyond the control of Ericsson,

including but not limited to lightning, water, fire, public distur-

bances and improper ventilation.

This product will not be considered defective in materials, design or work-

manship if it needs to be adapted, changed or adjusted to conform to

national or local technical or safety standards in force in any country other

than that for which the product was originally designed and manufactured.

This warranty shall not reimburse such adaptations, changes or adjust-

ments, or attempts to do so, whether properly performed or not, nor any

damage resulting from them, nor any adaptation, change or adjustment to

upgrade the product from its normal purpose as described in the product

manual without the prior written consent of Ericsson.

Repair or replacement under the terms of this warranty shall not give a

right to an extension to, or a new commencement of, the period of war-

ranty. Repair or replacement under the terms of this warranty may be ful-

filled with functionally equivalent reconditioned units. Exchanged parts or

components will become the property of Ericsson.

This warranty does not affect the purchaser’s statutory rights under appli-

cable national legislation in force, nor the purchaser’s rights against the

dealer arising from the sales/purchase contract.

In the absence of applicable national legislation this warranty will be the

purchaser’s sole and exclusive remedy. Ericsson, its subsidiaries and dis-

tributors shall not be liable for any incidental or consequential damages for

breach of any express or implied warranty relating to this product.

Содержание 230












































































































Результаты поиска

Содержание 230

Отзывы:

Похожие инструкции для 230

Бренды по названию

Популярные бренды

Ericsson 230, Руководство пользователя

Результаты поиска

Содержание 230

Отзывы:

Похожие инструкции для 230

Бренды по названию

Популярные бренды