ERICO SBG200, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 17

iv
www.erico.com
FUEL
DANGER
DO NOT SMOKE or bring any flame or sparks near fuel. Failure to observe this precaution can be fatal or result in serious injury.
EXPLOSION, FLAMMABILITY HAZARD: Failure to refuel the equipment away from open flame, spark generators, or other
ignition sources, including smoking (cigarette or other), will result in a fatal or serious injury accident. Never start the engine in
an explosive atmosphere or near flammables.
WARNING
EXPLOSION FLAMMABILITY HAZARD: Failure to remove fuel cap slowly to release pressure and/or re-install fuel cap properly
may cause spurting of gasoline onto hot parts of the engine and possible fire resulting in serious or fatal burns. Use only approved
safety fuel-containers for storage and transport of fuel.
CAUTION
INSTRUCTIONS FOR ADDING FUEL:
Select a safe area for fueling. Move at least 10 feet (3 m) from the fueling spot before starting the engine.
1. Ensure area around fuel cap is free of dirt. Loosen fuel cap slowly.
2. Add fuel to reservoir and avoid spillage by not overfilling.
3. Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage
4. For long-term storage of the grinder, drain and clean the fuel tank and run engine to ensure that no fuel is in carburetor.
Store the grinder in the toolbox provided. Ensure the storage area is secure and not accessible to children or other
unauthorized persons.
This tool is designed to operate on unleaded gasoline. A high quality/name-brand gasoline is recommended.
The unleaded gasoline requires a minimum octane number 86. Fuels with a lower octane level may result in premature engine
failure and may void the warranty.
The chemical composition of the fuel is also important. Various additives may affect seals, fuel lines, diaphragms and metal cast
materials. Therefore it is essential that only high quality/name brand fuels be used.
OXYGENATED FUELS:
The following are maximum recommended percentages of oxygenates:
ETHANOL (ethyl or grain alcohol) 10% max by volume
MTBE (methyl tertiary butyl ether) 15% max by volume
METHANOL (methyl or wood alcohol) 5% max by volume
Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more than the
percentages of oxygenates mentioned above are not covered under warranty.
RECOMMENDED ENGINE OIL: We recommend the use of any high quality/name brand SAE 10W-30-engine oil.
!
!
!