7
Insert the TL074 IC! Solder two switches and
place LEDs in relevant places.
Do not solder
LEDs yet!
9
Use the M3x6 screw to fix the spacer to the Control
PCB! Connect both PCBs together and fix the bottom
one with other M3x6 screw! For all our modules
with 2 PCBs white stripes on both PCBs have to
match.
10
Install the front panel and potentiometer knobs!
Congratulations! You have completed Erica Synths
SWAMP module!
It does not need calibration and
will work straight away.
8
Put the front panel on and push LEDs into their
places. Now you can solder them.
GUIDE TO ASSEMBLY OF ERICA SYNTHS SWAMP MODULE