3
Solder electrolytic capacitors, transistors and
trimpots on the Main board! Mind polarity of
electrolytic capacitors and orientation of
transistors! Don’t mix up NPN and PNP transistors!
5
Solder potentiometers and jacks on the
Control PCB! Do not mix values of
potentiometers!
GUIDE TO ASSEMBLY OF ERICA SYNTHS SWAMP MODULE
4
Solder 3 vactrols and S&H IC 1100CK! Make sure
the key of the IC matches the silkscreen! Insert
ICs in relevant sockets! Mind direction of ICs!
6
Turn the Control PCB around and solder board
connectors and PSU connector. Then solder two
electrolytic capacitors and resettable fuses. Note
that one fuse is bent down horizontally!
Negative lug of
electrolytic
capacitor is marked
with a stripe!