7
Use two black M3 screws and nuts to fix DIN5 midi
connector! Midi connectors typically are installed
upside down. Solder wires to lugs 4 and 5
9
Insert ICs, connect both boards together
and fix with M3 screw!
GUIDE TO ASSEMBLY OF ERICA SYNTHS DIY MIDI-CV INTERFACE
8
Place LEDs in the relevant places (mind the
polarity),
but do not solder them yet!
Install
the front panel, fix it with jack and
potentiometer nuts! Push the LEDs in relevant
holes on the front panel and solder them. Cut
off their pins! Also solder MIDI connector wires
in the relevant holes!
10
Congratulations! You have completed
assembly of Erica Synths DIY MIDI-CV
interface! Now it’s time to do some
calibration!