3
Turn the Controls board around and solder two
resistors, female connectors, PSU connector and
electrolytic capacitors!
If you use 10mm high
capacitors (most common ones, and ones included
in the full kit), solder them horizontally!
5
Use M3 screw to fix the 11mm spacer!
GUIDE TO ASSEMBLY OF ERICA SYNTHS DIY MIDI-CV INTERFACE
4
Solder ceramic capacitors, electrolytic
capacitors, ferrite beads and 16MHz
crystal on the Main board!
Solder these
horizontally!
This is the negative lug of
the electrolytic capacitor!
6
Turn the Main board around and solder male
connectors and an electrolytic capacitor!