Operating Instructions for ERHARD NON SLAM Nozzle Check Valve
Fig. 1.3: Installation in horizontal pipeline
(left hand: Check Valve DN 80 – 300, right
hand: Check Valve DN 350 – 600)
Fig. 4.2: Installation in vertical
pipeline
For installation into vertical pipeline insert two bolts of appropriate material and strength
into two opposite flange holes to which the belts are fixed at the flange back (see fig.
1.4). Please provide protective devices at the bolts (e.g. sleeves of plastic material ...)
for protecting the coating of the flange holes.
1.5.2 Storage
The ERHARD NON SLAM Nozzle Check Valves are to be secured by means of wedges
or belts (fig 1.5) against rolling off, or good stability has to be ensured by putting them
horizontally on the flange (fig. 1.6).
Fig. 1.5
Fig.1.6
1.6
Installation into the Pipeline
Remove all packing material from the valve. Prior to installation, check the pipeline
for impurities and foreign bodies and clean it if necessary.
BA43E000
Juli 2009
Rev.9
ERHARD GmbH & Co. KG
x
D-89502 Heidenheim
x
Postfach 1280
Telefon: (07321) 320-0
(07321) 320 491 E-Mail: info
@
erhard.de
Internet: http://www.erhard.de
Page 10 of 18
