888-61-101-G-00 rev.A • 05/14
6 of 9
Concrete
3
Attach to Wall
3-1/8"
(80 mm)
c
d
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over
time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light
duty thread locking adhesive to fasteners before installation to prevent back-out.
4
7
4x
1
2
3
10mm
4x
4x
M6
Ø 3/8" (10 mm)
M6 x 70mm
a
b
WARNING:
Mounting holes must be at least 3-1/8” (80mm) deep and must be located within solid con-
crete, not mortar or covering material. If you drill into an area of concrete that is not solid,
reposition mounting holes until both anchors can be fully inserted into solid concrete!
WARNING:
Anchors that are not fully set in solid concrete will not
support the applied load resulting in an unstable, unsafe
condition which could lead to personal injury and/or prop-
erty damage. Consult a construction professional if you
have any doubt about what this means in regard to your
particular situation.
CAUTION: Make sure the wall
mount bracket is level, fl ush and
snug to the wall surface. DO NOT
OVERTIGHTEN THE BOLTS.