5
Adjusting the Height and Depth of the Anthro Monitor Control System®
The Anthro Monitor Control System electronically adjusts the height and depth of the entire monitor bar. Use the buttons on the
keypad to adjust the settings. You can also adjust the tilt of each monitor manually.
Adjusting Your Lighting
Carl’s Table comes with four lights: two that provide the ambient light on the back panel and two task lights on fl exible gooseneck
arms to illuminate the work surface. Lights are controlled manually using the knobs on the left side of the table.
Using Your Footrest
If you’re working standing up, you can swing out this footrest to alleviate pressure on your lower back. When you’re done, just
swing it back towards the table leg.
Relocating Carl's Table
If you'd like to relocate your Carl's Table, please contact us for assistance! Relocating the table without Anthro or our authorized
agent will void the warranty.
Installing Your Equipment
Only your IT personnel can install your hardware onto Carl's Table. Use the instructions that are included with those components.
300-5642-00 rev. C
• 09/18
