13 of 22
888-25-003-02 rev.G • 05/07
NO OSHPD
REVIEW REQUIRED
Centerline of Four-Hole
VESA FDMI Pattern
A = 16-1/2 – (B + 3-1/2)
B = Keyboard depth
Fig. 2
Fig. 1
Rear of Monitor
A
A
≤
7"
(178 mm)
3-1/2"
(89 mm)
B
A
A
≤
8-3/4"
(222 mm)
16-1/2"
(419 mm)
7
VL Series Attachment
For VL Series to remain less than 4" (102 mm)* from the wall*
when in storage position, follow these guidelines:
1.
Monitor must not be more than 2-1/2" (63 mm) thick.
2.
Keyboard should not be more than 7-1/4" (184 mm) deep.
3.
Dimension “A” must be no greater than 8-3/4" (222 mm).
4.
Use Standard Keyboard Tray option only (Slide-Out Keyboard Tray
option depth
≥
4-1/2", 114 mm).
* Exceptions:
If you want to install your keyboard in a forward position while remaining
≤
4" (102 mm) from the wall,
“A”
≤
7" (178 mm). See Figure 1.
If you want to use a keyboard wrist rest,
dimension
“A”
can be calculated by adding
3-1/2" (89 mm) to the keyboard depth
“B”
and subtracting this sum from
16-1/2" (419 mm).
See Figure 2.
Side
View