Operating Instruction
Spindle lifting system SL/SM 13xx with SCT iSMPS
Document no : B-00361
Edition 2020 06
Operating instruction EN
Copyright by Ergoswiss AG
22/27
7
Synchronize 2 control boxes
With the SYNC-2 cable SCT (124.00183) two control boxes can be
used and synchronized.
The SYNC-2 cable SCT is 4000 mm
(157.5’’)
long. It is not possible to
extend the SYNC-2 cable. If necessary, the motor cables must be ex-
tended.
7.1
Commissioning
Initial operation of 2 control boxes
Changing from 1 control box to 2 control
boxes
1.
Connect all cables to the control box accord-
ing to chapter 3.2, until step 4.
2.
Connect the SYNC-2 cable to the two control
boxes.
3.
Connect the hand switch to one of the control
boxes.
4.
Connect the power cable to the control box.
5.
Connect the power cable to the mains.
6.
Do an initial operation according to chapter 4.
1.
Reset all control boxes that were already in
operation to the factory settings according to
chapter 5.7.
The SYNC-2 cable SCT is installed in step 2.b.
