Operating Instruction
Spindle lifting system SL/SM compact
Document no.: B-00061
Edition 2018 02
operating instruction EN
Copyright by Ergoswiss AG
11/23
3.2.3
Manual control switch D / Memory
1.
Position the mounting plate underneath the table
plate. (Note distance to table edge -> 29 mm)
2.
Fasten the mounting plate using the mounting
screws. Be careful not to drill through the table top!
3.
Slide the manual control switch onto the mounting
plate.
3.2.4
Manual control switch Memory Touch
1.
Position the manual control switch at the desired loca-
tion underneath the table top.
The front edge of the manual control switch should
not stick out of the table edge.
2.
Fasten the manual control switch using the mounting
screws.
Be careful not to drill through the table top!
