Operating instruction
Hydraulic lifting system with Hand crank
Documant no.: B-00011
Edition 2022 08
Operating instruction EN
Copyright by Ergoswiss AG
Page
9
of
13
3
Mounting instructions
3.1
Mounting instructions Lifting element
NOTE
The hydraulic tubing is to be assembled to the lifting element in accordance with the assembly
instructions. Information on mounting the lifting element can be found in the technical draw-
ings.
3.2
Mounting instructions Pump
NOTE
The lifting element is to be assembled to the pump in accordance with the assembly instruc-
tions. Information on mounting the pump can be found in the technical drawings.
NOTE
To all connections of the pump a lifting element must be connected to, otherwise the pump
will block and the lifting system will be damaged.
3.3
Mounting instructions Lifting system
NOTE
The pump with hand crank is to be assembled to the existing system in accordance with the
assembly instructions. Information on mounting the pump with hand crank and the lifting ele-
ments can be found in the technical drawings.
NOTE
The minimum tubing bending radius is 25 mm. The tubing must be routed in such a way that
it is not exposed to any mechanical stress, no aggressive media (chemicals), no direct sunlight
(UV radiation) and no heat.
