Operating instruction
Hydraulic lifting system with Hand crank
Documant no.: B-00011
Edition 2022 08
Operating instruction EN
Copyright by Ergoswiss AG
Page
10
of
13
4
Operation
ATTENTION
Danger of squeezing during height adjustment!
ATTENTION
The entire lifting area of the lifting element must always remain free. The lifting element is
not allowed to hit a stop before it reached its upper and lower block positions. Otherwise air
will be pulled into the system or too much pressure will build up.
4.1
Extending the lifting system
By turning the hand crank clockwise the lifting elements are extended.
Turn the crank until the desired working height is reached.
NOTE
The hand crank may be actuated with a maximum torque of 18 Nm!
The system must not be driven towards the end position with momentum!
4.2
Retracting the lifting system
By turning the hand crank counter-clockwise the lifting elements are retracted.
Turn the crank until the desired working height is reached.
NOTE
The hand crank may be actuated with a maximum torque of 18 Nm!
The system must not be driven towards the end position with momentum!
Max. 18 Nm
Max. 18 Nm
