ErgoPack 700X-Li Скачать руководство пользователя страница 114

Страница: 114 / 116

g) Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working

conditions and the work to be performed.

Use of the power tool

for operations different from those intended could result in a

hazardous situation.

Battery tool use and care

a) Recharge the battery packs only with the charger specified by

the manufacturer.

A charger that is suitable for one type of

battery pack may create a risk of fire when used with another

battery pack.

b) Use power tools only with specifically designated battery

packs.

Use of any other battery packs may create risk of injury and

fire.

c) When the battery pack is not in use, keep it away from metal

objects, like paper clips, coins, keys, nails, screws or other small

metal objects, that can make a connection from one terminal

to another.

Shorting the battery terminals together may cause

burns or fire.

d) Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

Service

a) Have your power tool serviced by a qualified repair person

using only identical replacement parts.

This will ensure that the

safety of the power tool is maintained.

UK (Li)

-114-

Содержание 700X-Li





















































































































Результаты поиска

Содержание 700X-Li

Отзывы:

ErgoPack 700X-Li, Руководство по эксплуатации, Страница: 114 / 116

Результаты поиска

Содержание 700X-Li

Отзывы: