ErgoPack 700X-Li Скачать руководство пользователя страница 111

Страница: 111 / 116

Save all warnings and instructions for future reference.

The term „power tool“ in the warnings refers to your mains

-operated

(corded) power tool or battery-operated (cordless) power tool.

Work area safety

a) Keep the work area clean and well lit.

Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such as

in the presence of flammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power

tool.

Distractions can cause you to lose control.

Electrical safety

a) Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodified plugs and matching outlets

will reduce the risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as

pipes, radiators, ranges and refrigerators.

There is an increased

risk of electric shock if your body is earthed or grounded.

14.

General safety warnings for

power tools

Warning !

Read all safety warnings and instructions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or serious injury.

UK (Li)

-111-

Содержание 700X-Li





















































































































Результаты поиска

Содержание 700X-Li

Отзывы:

ErgoPack 700X-Li, Руководство по эксплуатации, Страница: 111 / 116

Результаты поиска

Содержание 700X-Li

Отзывы: