(EN)
ERGON BIKE ERGONOMICS
Adjusting the back length
Lift the pads outwards to the sides as illustrated above, pull
the shoulder plate upwards slightly and release the strap
underneath.
Pull the strap through the shoulder plate, and then thread it
through a different hole to pick the desired back length.
Note: When a back length is selected the strap covers the
selected length’s marking.
Please ensure when threading the strap that the shoulder plate
is threaded to the limit of the strap.
While replacing the pads to their original position, it is possible
to bend the shoulder plate slightly to allow the backpack to be
formed to suit the user.
By lightly bending an internal aluminium strip the user can
adjust the horizontal fit (aluminium strip is located between the
upper and lower pads).
Ensure that you have
fastened the poppers
fully.
Chosen back
length “M” hidden.
1.
2.
3.
4.
5.
6.