Ergon 60800N Скачать руководство пользователя страница 13

Страница: 13 / 78

Crack-Vac Model 100G Manual

Chapter 2 Safety

Safety 2-1

2.0 Safety Precautions

For more in-depth safety information, please see Safety Manual (P/N 26221) which comes with the
machine. Or contact your nearest authorized Crafco Distributor at

crafco.com/Distributors

2.1 General Safety

•

Crafco, Inc. assumes no liability for an accident or injury incurred through improper use of

the machine.

•

Read this manual thoroughly before operating the machine.

•

Obey all CAUTION and WARNING signs posted on the machine.

•

Make sure an operator fully knows how to operate the machine before using the machine.

2.2 Personal Safety

•

Eye and ear protection devices along with a dust mask are required when operating the

machine.

•

Wear long pants, work gloves and heavy leather boots or shoes.

•

When cleaning cracks and joints near moving traffic, always move in a direction away from

traffic to protect the operator.

•

Never allow fatigued operators to run the machine. Due to the nature of running this

machine, the crew leader should rotate operators as they see fit according to their
performance.

•

Keep hands, feet, and clothing away from all moving parts.

Содержание 60800N














































































Результаты поиска

Содержание 60800N

Отзывы:

Похожие инструкции для 60800N

Бренды по названию

Популярные бренды

Ergon 60800N, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 60800N

Отзывы:

Похожие инструкции для 60800N

Бренды по названию

Популярные бренды