Ergolux ELX-BS02-C72, Инструкция по эксплуатации

Страница: 9 / 12

8
WARNING: Before assembling and installing attachments, make sure that the power plug is not
inserted into the mains socket.
•• Attach the blender attachment (1) to the motor unit (2), and turn it counterclockwise until
bumping.
•• Insert the power plug into the mains socket.
•• Immerse the blender attachment (1) into the bowl with products that you want to chop/mix.
•• Set the required operation speed using the control knob (5).
•• To switch the unit on, press and hold down the button (4) «Power».
•• If you press and hold down the button (3) «Turbo», the unit will operate at maximum rotation
speed. Use this operation mode for combined processing of liquid and hard products.
Notes:
•• Products should be put into the bowl before the unit is switched on. The amount of processed food
should not exceed 2/3 of the capacity of the bowl in which the food is processed.
•• Before starting to chop/mix, we recommend to peel fruit, remove inedible parts, such as stones,
and cut fruit into cubes approximately 2х2 cm in size.
•• After you finish using the unit, take the power plug out of the socket and remove the blender
attachment (1), turning it clockwise.
Attention!
•• Do not remove the blender attachment (1) during operation.
•• To avoid damaging the blades, do not process too hard products such as cereals, rice, spices,
coffee beans, cheese and frozen food.
•• If the foodstuffs are hard to chop with the blender attachment, add some water, liquor or juice
if possible.
Use the whisk attachment (10) only to beat cream, make biscuit dough or for mixing ready desserts.
WARNING: Before assembling make sure that the power plug is not inserted into the mains socket.
•• Insert the whisk (10) into the gear (9).
•• Insert the whisk gear (9) into the motor unit
(2), and turn it counterclockwise until bumping.
•• Insert the power plug into the mains socket.
•• Immerse the whisk (10) into the bowl with products.
•• Set the required operation speed using the control knob (5).
•• To switch the unit on, press and hold down
the button (4) «Power». Use this operation mode for mixing liquid products.
•• If you press and hold down the button (3) «Turbo», the unit will operate at maximum rotation
speed.
•• After you finish using the unit, take the power plug out of the socket, disconnect the whisk (10)
from the gear (9) and disconnect the
gear (9) from the motor unit (2) by turning it clockwise.
Attention!
•• Do not use the whisk (10) to knead stiff dough.
•• Products should be put into the bowl before the unit is switched on.
Blender mode use
Whisk use