Cleaning and maintenance
03/2012
1006324-02
Operating instructions – 41/80
Component Interval
Activity
See
page
Afte
r ea
ch
ta
nning
sess
ion
Wh
en
ne
ce
ssary
50 h
1 Handle
X
Cleaning and disinfection
39
3 Control panel
X
Cleaning and disinfection
39
4 Acrylic glass
panel
X
Cleaning and disinfection
39
5 Adjustable air
nozzles
X
Cleaning and disinfection
39
Protective
goggles
X
Cleaning and disinfection
39
MP3 cable
X
Cleaning and disinfection
39
6 Air jets
X
Clean
39
7–8 Surfaces
X
Clean
39
11 Condensate
container
X
Empty
56
2 Filter
X Remove and clean filter
54
9 Filter
X Remove and clean filter
56
10 Filter
X Remove and clean filter
56
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.5
Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).