ergoline OPEN SUN 1050ULTRA POWER, Руководство по эксплуатации

Страница: 112 / 160

111
Safety instructions for maintenance and care
Maintenance and care play a major role in deciding whether your sunbed
meets your requirements satisfactorily. Compliance with the specified
maintenance intervals and the careful conducting of the maintenance
and care work are therefore absolutely necessary.
You can call up the current operating hours of the parts to be serviced in
preset mode.
Refit any protective devices (e.g. filter panels) after finishing working on
the sunbed.
Please note that the device must be inspected regularly by our customer
service or an approved specialised company every 12 months (from date
of commissioning) to maintain its proper condition.
Danger!
Disconnect the sunbed from the power supply when performing
maintenance work requiring opening of the device.
See page 113.
Danger of burns!
Only use the specified genuine UV lamps and filter panels !
(see “Installed lamps” on page 143 and see “Notes on in-
stalled lamps and tanning times” on page 84).
Using other UV lamps and filter panels leads to modified radi-
ation. This could potentially result in severe burns to the user!
The use of other UV lamps and filter panels invalidates
CE
conformity and the GS approval mark !
Caution!
Use only genuine spare parts of the same type! The use of
other parts voids the CE conformity !
Any liability is excluded in the case of damage or injury proven
to be the result of the use of non-genuine spare parts.