ergoline Inspiration 500 Series, Руководство по эксплуатации

Страница: 41 / 86

Operation
04/2019 1020632-00 Operating instructions – 39/82
3.5 NFC Connect
Data exchange via contactless near field communication – individual settings
can be stored on a chip card and called up again during the next session.
– Set the desired function during the tanning session.
The comfort settings can be saved in the period after the tanning session until
the end of the fan's warm-down time.
–
Hold the customer card close to the NFC point (max. distance 3 cm).
The individual comfort settings are automatically saved to the card.
The settings saved on the customer card can be read by all devices with NFC
Connect and the corresponding setting options.
Upon starting the following functions are activated:
–
Hold the customer card close to the NFC point (max. distance 3 cm).
The individual comfort settings are automatically transferred to the
device.
NFC status
The data transfer is indicated by colours.
The NFC point flashes pulsating:
Ready for use / Standby
During the fan run-on, the NFC point flashes in transmit
mode:
The settings can be transferred to a data carrier.
The centre point of the NFC point is green:
Settings have been successfully transferred from the data
carrier to the solarium.
The centre point of the NFC point is blue:
Settings have been successfully transferred to the data
carrier.
The centre point of the NFC point is orange:
a) Transmission error
– Hold the card in front of the point again and wait a little
longer.
b) The data carrier is empty.
– After tanning, the settings can be saved to the data
carrier.