ergoline INSPIRATION 400, Руководство по эксплуатации, Страница: 101 / 126

Cleaning and maintenance
07/2015 1016259-00A Operating instructions – 35/58
Component Interval Activity See page
Af
ter each
tanning ses- sion When nec- essary 50 h
1 Acrylic glass panel X Cleaning and disinfection 33
5 Air nozzles X Cleaning and disinfection 33
6 Operating panel X Cleaning and disinfection 33
Handle X Cleaning and disinfection 33
Protective goggles X Cleaning and disinfection 33
MP3 cable X Cleaning and disinfection 33
3, 7 Surfaces X Clean 33
4 Filter X Remove and clean filter 47
2 Filter X Remove and clean filter 45
8 Screen X Clean 47
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
4.5 Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).