ergoline ESSENCE 440 SMART POWER 200, Руководство по эксплуатации

Страница: 97 / 120

Cleaning and maintenance
12/2012 1012945-00 Operating instructions – 37/56
Component Interval Activity See page
After each ta
nn
in
g se
ssion
Wh
en
ne
ce
ssary
1 Entry area X Cleaning and disinfection 35
2 Foot mat (Plastic) X Cleaning and disinfection 35
3 Control panel X Cleaning and disinfection 35
4 Holding bars X Cleaning and disinfection 35
Protective goggles X Cleaning and disinfection 35
MP3 cable X Cleaning and disinfection 35
5 Acrylic glass panels X Cleaning 35
6 Surfaces X Cleaning 35
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.6 Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).