ergoline ergometrics er900, Руководство по эксплуатации

Страница: 59 / 84

Operation Manual
Version: 12/01
55
er900L Operation Manual
Art-Nr: 475.043
Ergometer
Type er900L
Pay attention to the execution of the program when programming. Since program 9 is
a pure training program, alarm parameters (except for heart rate) should be chosen
that any danger to the patient is remote. Select a warm-up load parameter (used until
reaching the max. heart rate value set) such that reaching the heart rate value will not go
to quickly or take too long. When the warm-up phase is too short, reasonable pulse-
steady-state training is not possible as the circulatory system has not yet adjusted to
the load. When the warm-up phase is too long, the patient is already tired before the
actual training phase has been reached.
!
Program 9 is purely a training program. Parameters must be selected that
reflect the requirements of this mode of operation (as opposed to pro-
grams 0-8).
You should write your program on one of the programming forms before entering the
program on the console of the ergometer. The programming form is an aid that helps
the operator maintain an overview of the various parameters. The program forms also
represent a permanent record of the programs that are available if the unit should mal-
function. You will find blank programming forms in the appendix to this Operation Manual.
!
Write your programs on the program forms (as found in the appendix to
this manual) before entering them in the console of the ergometer. This
contributes to clarity and proper record keeping.
Structure of Programs