Installation Instructions
Model: KTG-Series
7
Figure 11: Mount Centris Bracket to Display
7.
Slide display with Centris bracket onto array rail (20,
30) (see Figure 12).
NOTE:
Repeat previous steps for each additional display.
8.
Reinstall end locks into mounting rail using the 5/32"
hex key (120) (see Figure 13).
Figure 12: Mount Display with Centris Bracket to
Array Rail
Figure 13: Reinstall End Lock(s)
ADJUSTMENTS
Display Adjustment
The KTG Series mount allows horizontal, pitch, and
rotational adjustment of each display.
The KTG Series mount also allows a full 360 deg. of
display rotation with a maximum pitch range of 15° up
and 15° down.
Display Horizontal Position Adjustment
To adjust display horizontal position:
1.
Loosen Centris bracket rear adjustment knob (see
Figure 14).
2.
Slide Centris bracket with display left or right until
properly positioned on array rail.
3.
Tighten Centris bracket rear adjustment knob.
Figure 14: Display Horizontal Adjustment
Display
Centris Head
Spacer
Phillips Pan Head Screw
(170 or 180)
(190 or 200)
Display with Centris Bracket
(20, 30)
End Lock
End Lock Retaining Screw
Centris Head
(20, 30)
Horizontal
Adjustment
Knob
