Model: KTG-Series
Installation Instructions
2
TOOLS REQUIRED FOR INSTALLATION
•
Drill and 1/2" drill bit (larger if mounting through a flat surface and using cable management)
•
Phillips Head Screw Driver
•
3/4" Wrench
•
3/32" Hex Key (provided)
•
5/32" Hex Key (provided)
•
7/32" Hex Key (provided)
INSPECT MOUNT BEFORE ASSEMBLY
Carefully inspect components for shipping damage . If damage is apparent, call your carrier claims agent and do not
continue with installation until the carrier has reviewed the damage.(see Figure 1)