ERGO-FIT Cardio Line 4000, Руководство пользователя

Страница: 32 / 146

Technical and visual modifications as well as misprints reserved - © 2018 by ERGO-FIT GmbH & Co. KG
Transport and Installation
2 6
2. Plug the power cord into the appropriate power entry module (see picture). Plug
the other end of the cable into the power outlet. On the TRAC model additionally
move the retaining clip to fix the power cord on the input module .
3. Switch on the machine by pressing the power button (I = ON, O = OFF). To switch
on the TRAC model use the button at the automatic circuit breaker (see chapter
6.1).
4. After your exercise machine has been connected to mains and switched on, it
automatically carries out an operating check. During this operating check, you will
be able to read the software version of the unit on the display. Thereafter the main
menu will appear.
5. Stand on the side of the control panel (view onto the display) and check if the
display works. If this is not the case, make sure you followed the steps above
correctly. In addition, verify if there is electricity in the mains socket (This is not
applicable to models of the 4000 SP and 4000 S SP series!).
5.4.1 Power Supply
Use your exercise machine only with earthed (grounded) power sockets with 230
VAC / 50-60 Hz (see chapter A5). If you have any doubts about the power supply at
the setup location, ask your energy provider. For TRAC you have in any case to ob-
tain the permission of your energy provider. Only use commercial 10 ampere (16 am-
pere with TRAC) automatic circuit breakers (type B tripping characteristic). In the rare
event that these automatic circuit breakers should switch off when you switch on your
machine, the circuit needs to be fused with 10 A (16 A with TRAC) lead fuses or with
a different type of tripping fuse (e.g. K-automat). In case of doubt, ask your electrician.
Before connecting your ERGO-FIT exercise machine to your power supply system, com-
pare the acceptable voltage and frequency on the name plate (next to power entry module)
with your local data.