manualshive.com logo in svg

Ercolina Top Bender 050, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Ercolina Top Bender 050 Скачать руководство пользователя страница 7

7

CML International S.p.A.

 

Do not use the machine beyond the maximum capacities indicated;

Non qualified and non authorised personnel should be prohibited from
effecting maintenance work or repair on the machine;

 Do not clean the machine without switching off power supply;

 Do not tamper with electrical and electronic circuits in any way for safety
reasons and in order not to invalidate the warranty conditions;

 

Do not effect transportation of the machine dragging it by the power cable;

Do not modify the machine structure.

!!WARNING:

 Use only Ercolina® line accessories. Any alterations will cause

the invalidation of the warranty. The Manufacturer reserves the right to not supply
accessories or replacement parts in case the machine has been altered;

 Avoid putting fingers between former and machine while mounting the former;

 Do not leave the machine unattended with power supply switched on.

Содержание Top Bender 050





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды