background image

Care and maintenance

Wood Furniture

Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.

All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.

How to care for your wood furniture

Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.

When using the surface for serving food and drinks it is best to use protective mats and coasters.
Spillages should be wiped up as soon as possible.

Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building
up over time. 

Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any

bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer 
surface.

Wipe up spills immediately. If sticky marks occur on the surface they can be removed with a dilute

solution of warm soapy water. 

The offending area should be rubbed lightly and then completely dried 

immediately afterwards, before replacing any mats etc.

Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to
heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused
by central heating can cause damage such as warping.

Safety Instructions

Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture as 
careless handling may cause damage or injury. No liability will be accepted for damage or injury caused by 
incorrectly installed furniture.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire.  HP27 9PX   www.ercol.com

Содержание teramo 2689

Страница 1: ...are missing please contact the retailer from whom you bought this product This product is HEAVY it should be assembled as near as possible to the point of use TAKE CARE WHEN LIFTING to avoid personal injury and or damage to the product This product takes approximately 20 MINUTES to assemble with 2 PEOPLE The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROMYOUNG CHILDREN ercol Than...

Страница 2: ... TOP OF THE BRACKET IS BELOW the top of the chest Position the chest against the wall where you want it to go place the second bracket onto the wall below the one fixed to the chest and mark where the holes come on the wall Move the chest away from the wall 2 Attach the wall bracket using screws suitable for your type of wall see Wall fixings above 3 Place the chest back against the wall so the tw...

Страница 3: ...4 If the chest is not level on your floor use the wedges provided and snap them off so that they do not protrude out from the cabinet s legs you can also snap them lengthways if desired ...

Страница 4: ...ontaining abrasive compounds acidic or caustic reagents and any bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface Wipe up spills immediately If sticky marks occur on the surface they can be removed with a dilute solution of warm soapy water The offending area should be rubbed lightly and then completely dried immediately afterwards before repl...

Отзывы: