Fittings and parts checklist
Wall fixing
- if in doubt seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
1. See fig 1 below. Screw one of the brackets on to the back of the chest in the middle, using the short
screws provided. Make sure the TOP OF THE BRACKET IS BELOW the top of the chest. Position the
chest against the wall where you want it to go, place the second bracket onto the wall below the one
fixed to the chest and mark where the holes come on the wall. Move the chest away from the wall.
2. Attach the wall bracket
using screws suitable for your type of wall
, see
Wall fixings
above.
3. Place the chest back against the wall so the two brackets match up and tie them together with
the plastic strap provided
. The plates need not match exactly, but the plastic tie must go through
each plate. Close the strap, but do not over tighten it. See diagrams fig3 below.
A
16mm Screws x 1
C
Brackets x 2
B
Wedges x 2
Strap x 1
