3. Using the N 12 x 20mm screws, attach the K
two brackets into the headboard and the footboard using the
pre-drilled holes, tighten with a phillips screwdriver.
4. Making sure the holes in the centre rail are facing upwards, put the centre rail into the two brackets.
Secure it in place using the 2 x
bolts, and the 2 washers and
nuts.
5. Push a plastic cap onto each end of a slat and with the peg facing downwards push the slat into the pre
drilled holes as shown below. Repeat for all the slats
.
Once the centre rail is in place, tighten all four corners so that they are secured.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
Fittings
N*12
M*2
L*2
K*2
M*2
D
M
L&M
D
Fittings
135CM
F*64
150&180CM
F*68
F
E
x
2 x