Step by step instructions
1. Place the wooden fixing blocks on top of your Chiltern display cabinet as shown in Fig.1 depending on
where you would like your cabinet to stand, either flat against the wall (2 blocks) or at right angles to
it (one block). Place the cabinet against the wall.
2. Mark with a pencil round the circular end of the fixing block(s) where it touches the wall, Fig.1
A - flat against the wall
B - at right angles
to the wall
Fig 1
Fig 2
3. Move the cabinet away from the wall and place the wall fixing block back on it’s mark on the wall,
then mark the screw hole position on the wall. Drill a hole into the wall. Repeat if cabinet is to go
flat against the wall.
4. Using fixings appropriate to your type of wall, attach the fixing block(s) to the wall as fig 2.
SPECIAL NOTE:
Put the glass shelves in place, AFTER the cabinet is fixed to the wall.
