Move the wardrobe into it’s final position against the wall. Align the L bracket to the pre drilled holes
on the top of your wardrobe in the middle along the back rail and using the 2 x 15mm screws fix the
bracket to the top of your wardrobe. Then make a mark on your wall through the two holes of the
bracket. Take the wardrobe away from the wall. Then drill two holes in your wall where your marks
are. Move the wardrobe back into place, align the bracket up with the holes in your wall and partially
tighten the bracket to the wall using appropriate fixings for your type of wall.
7. We recommend that you fix this wardrobe to the wall, using appropriate fixings for your type of wall,
see fig.7
fig. 7
8. If the wardrobe needs levelling, use the wedges as shown in fig.8.
fig. 8
If the chest is not level on your floor, use the wedges provided. Snap them off, so they do not protrude
out from the cabinets legs. You can also snap them lengthways. See diagram below.
