background image

 

EG_GenPro53e_1040_UG_003_UK 

Page 9 / 71

 

Descriptions and non-contractual illustrations in this document are given as an indication only. 

 

ERCO&GENER reserves the right to make any modifications 

Copyright 

 

The reproduction, transfer, distribution or storage of part or the totality of the contents of this document, in 

any form, without the prior written authorization of ERCO & GENER is strictly prohibited. 

 

GenPro 53e

 is a trademark of ERCO & GENER.  

Hayes is a registered trademark of Hayes Microcomputer Product Inc. The names of products and 

companies mentioned in this document may be names or trademarks of their respective holders. 

 

The use of some products or services described in this document may require a paying subscription. The 

availability of some products or services described in this document may change, depending on the 

configurations and the materials.  

In some countries, restrictions of use of the devices may be applied. For more information, thank you to 

contact your nearest legally qualified local government representative. 

 

ERCO & GENER follows a method of continuous development. Consequently, ERCO & GENER reserves 

the right to change and improve any of its products described in this document, without notice. 

The contents of this document are provided “as it is”. Except for the applicable obligatory laws, no guarantee 

in any form, explicit or implicit, including but without being limited to it the implicit guarantees of aptitude to 

marketing and of appropriateness to a particular use, is granted concerning the precision, the liability or the 

contents of this document. ERCO & GENER reserves the right to revise or withdraw this document at any 

time and without notice. 

 

ERCO & GENER cannot be held responsible for any loss of data or income, as well as particular damage, 

incidental, consecutive or indirect. 

 

 

 

 

Содержание GenPro 53e








































































Отзывы: